Trendnet Router Setup: How to Install a Trendnet Router:
Trendnet Router Setup: The Router which provides an access point to all local devices can connect and provides safeguards to secure the network, preventing malicious users from spying on the data sent or received over the network. This means that in an office you and your employees can connect to the network without spending the money for wiring the office building for Ethernet connections.
All the organizations, schools and colleges can use Trendnet wireless router to connect together all of the wireless devices.It might be some difficulty with the installation process if you are installing it for the first time. Follow the below process.
Trendnet Router Setup: How to install a Trendnet Wireless Router:
First, you need to disconnect the cable modem from an electrical outlet. Connect an Ethernet cable to the jack on the back of the modem and the WAN jack on the back of the wireless router.
Next, you need to plug an Ethernet cable into an available “LAN” jack on the back of the router and then you need to connect the other end to a computer.
After completing the above step you need to connect the cable modem and wireless router to an electrical outlet. Then you need to switch on the power button to on position which is the present back to the Trendnet device.
Then, confirm that the “power”, “LAN”, “WAN” and “WLAN” lights are on; and the power light should remain solid, and the LED’s should be flashing or blinking.
Now you need to open a web browser and type or copy paste any router IP address without quotes in the address bar.
Then press enter button. Once your pages load completely enter your login credentials such as username and password in the required fields and press the enter button.
Click on the “Network” and select “WAN Setting”, Select “DHCP” from the connection type drop-down menu and click on the “Apply”, button.
Next, click wireless and select basic and enter a unique name which you like the network into the wireless name (SSID) field. Then click on the apply button.
Then choose a Security from the wireless menu. Select “WPA2-PSK” as the security mode.
Now you can enter unique passphrase into the key field.
Trendnet Router Setup: How to Setup a Trendnet Router:
The basic configuration setup is the same for the most ADSL Router’s. Actually, it varies slightly for each model.
Step 1: Obtain the default gateway for Trendnet router.
Step 2: Open your browsers such as IE, Mozilla, Google Chrome, or Safari.
Step 3: You need to enter your default gateway in the search bar of your browser and click on the enter button.
Step 4: Once your page loads completely a Pop-Up Window will be displayed where you need to enter your username and password in the required fields and click on the enter button. As the default factory settings for the username and password should both be “Admin”.
Step 5: Then you need to select Setup Wizard and click on the next button as shown below.
Step 6: Select the PPPoE option and click on the next.
Step 7: Next, you need to select Manual Selection and click on the next button.
Step 8: Now you need to ensure the details on the next page are as shown below and click on the next button.
Step 9: Now you need to enter your connection details such as username and password. This information will be available from your ISP.
Step 10: Next, you need to setup your WiFi settings. If you do not want to use wireless feature on your router then you need to uncheck the device enable and click on the next button or else if you want to use wireless feature, ensure that the device enables checkbox and click on the next and enter your SSID. The SSID is the name that you want to call your wireless network and click on the next button.
Step 11: Then you need to setup your Wireless Security setting. If you do not want a Secure Wireless Setup, then you click on the none option from the Security mode and then click on the next button or else if you can select WPA/WPA2+TKIP/AES and enter the password in the required fields which shown below.
Step 12: After entering all the above details correctly you will get a message displaying that OK. Then all your settings will be saved and restart your router. It will take 1-2 minutes then you will be able to connect to the Internet afterward.
This all the information we gathered about Trendnet Router Setup. Please stay connected with our web portal for more updated information.